TRU VUE® AR Reflection-Free®
AR Reflection-Free® glass offers the same amazing clarity as Museum Glass®, but does not provide Conservation Grade UV Protection. It allows over 97% light transmission and reduces reflections to less than 1%. The result, enhanced colours, brightness and reflection-free viewing for optimal clarity.

Technical Info

• Achieves over 97% light transmission to enhance colours, brightness and contrast levels
  
• Blocks up to 78% of UV light rays
  
• 2.5mm glass substrate

When To Use

• Ideal for reflection-free viewing when conservation grade UV protection is not a concern
  
• To enhance colors, brightness and contrast levels

Handling

• Glass should be handled with care. To avoid injury cotton gloves should be worn
• Avoid dragging the lites of glass against one another when removing from the box
  
• Do not slide the lite of glass into place. Lift it up to adjust reposition

Cutting

• Place a slip sheet or a non-slip matboard between the glass and the back of the wall cutter
  
• Do not score the UV coated side. The inkjet printing stating "this side faces artwork" indicates the UV coated side
  
• Place the lite of glass in the wall unit with UV coated side toward the wall, facing the slip sheet or matboard
  
• Keep the glass cutter clean of glass chips by brushing away fragments frequently with a horse hair brush

Cleaning
All of Tru Vue glass products are clean and ready to use. If spot cleaning is needed use the following techniques:

• Place the glass on a clean, non-abrasive surface for cleaning
  
• Use a clean, soft, lint-free cloth to clean the glass. Tru Vue recommends using a micro-fibre cloth
  
• Spray a small amount of ammonia-free cleaner onto the cloth. Spraying on the cloth will prevent overspray
  
• Press the cloth against the glass and clean in round, circular motions