TRU VUE® Conservation Reflection Control®
Conservation Grade UV Protection
Conservation Reflection Control® glass enhances the beauty of artwork with a matte-like finish that scatters light to minimise unwanted glare. Additionally, it effectively blocks up to 99% of UV light rays to help protect art, photographs and other important personal keepsakes from fading and deterioration caused by harmful UV light rays.

Technical Info

• Matte-like finish to minimise glare and allows 89% light transmission
  
• Blocks up to 99% of UV light rays
  
• Achieves over 97% light transmission to enhance colours, brightness and contrast levels
  
• Meets ISO 18902 and passes ISO 18916, by providing at least 97% UV protection
  
• Does not degrade or delaminate over time. Tru Vue use a proprietary inorganic, silica-based UV blocking coating with a matte-finish, which is "baked" into the glass producing a permanently bonded coating
  
• 2.5mm glass substrate

When To Use

• To minimise glare while protecting art, photographs and other important personal keepsakes against harmful UV light rays
  
• Use on any framing project with up to two mats away from piece without significant resolution loss

Handling

• Glass should be handled with care. To avoid injury cotton gloves should be worn
  
• Avoid dragging the lites of glass against one another when removing from the box
  
• Do not slide the lite of glass into place. Lift it up to adjust reposition

Cutting

• Place a slip sheet or a non-slip matboard between the glass and the back of the wall cutter
  
• Do not score the UV coated side. The inkjet printing stating "opposite side faces artwork, score opposite side" is printed on the UV coated side
  
• Place the lite of glass in the wall unit with UV coated side toward the wall, facing the slip sheet or matboard
  
• Keep the glass cutter clean of glass chips by brushing away fragments frequently with a horse hair brush

Cleaning
All of Tru Vue glass products are clean and ready to use. If spot cleaning is needed use the following techniques:

• Place the glass on a clean, non-abrasive surface for cleaning
  
• Use a clean, soft, lint-free cloth to clean the glass. Tru Vue recommends using a micro-fibre cloth
  
• Spray a small amount of ammonia-free cleaner onto the cloth. Spraying on the cloth will prevent overspray
  
• Press the cloth against the glass and clean in round, circular motions