Tru Vue Reflection

Control Glass

Conservation Grade UV Protection

Reflection Control® glass enhances the beauty of artwork with etched matte-like finish that scatters light to minimise unwanted glare.

Technical Info

  • Blocks up to 45% of UV light

  • Allows over 90% of light transmission and less than 8% light reflection

  • 2.5 mm glass substrate

 

When To Use

  • Works well in any presentation hung in a controlled lighting environment

  • Can be used with any number of mats

 

Handling

  • Glass should be handled with care. To avoid injury cotton gloves should be worn

  • Avoid dragging the lites of glass against one another when removing from the box

  • Do not slide the lite of glass into place. Lift it up to adjust reposition

Cutting

  • Place a slip sheet or a non-slip matboard between the glass and the back of the wall cutter

  • Do not score the UV coated side. The inkjet printing stating “this side faces artwork” indicates the UV coated side

  • Place the lite of glass in the wall unit with UV coated side toward the wall, facing the slip sheet or matboard

  • Keep the glass cutter clean of glass chips by brushing away fragments frequently with a horse hair brush

 

Cleaning

All of Tru Vue glass products are clean and ready to use. If spot cleaning is needed use the following techniques:

  • Place the glass on a clean, non-abrasive surface for cleaning

  • Use a clean, soft, lint-free cloth to clean the glass. Tru Vue recommends using a micro-fibre cloth

  • Spray a small amount of ammonia-free cleaner onto the cloth. Spraying on the cloth will prevent overspray

  • Press the cloth against the glass and clean in round, circular motions

GET IN 
TOUCH

Q Framing Pte Ltd
2 Bukit Batok Street 23
#06-05 Bukit Batok Connection
Singapore 659554

 

(65) 6299 4180

(65) 6462 1082

qframing@qframing.com.sg

  • White Facebook Icon
  • White Instagram Icon

© 2019 by Q Framing Pte Ltd. Proudly created with Wix.com